Skip to content
Emergency plumberDeptford

SE1 · SE16 · Open 24 hours

Emergency plumber
in Bermondsey

From Shad Thames lofts to the estates off Southwark Park Road, we are the emergency plumber in Bermondsey for bursts, leaks and loss of water in SE1 and SE16.

  • Gas Safe registered 567789
  • Open 24 hours, 7 days
  • City & Guilds qualified
  • Fully insured

Smell gas? Leave the plumber till later. Call the National Gas Emergency Service free on 0800 111 999.

Can't talk right now?

Tell us what’s happening

Tap through a few questions and a plumber calls you back. Photos help us bring the right parts.

Emergency callout · 1 of 13

What's happening?

Tap the closest. You can tell us more in a moment.

Prefer to talk? Call 07833 985534

Southwark · SE1, SE16

Plumbing emergencies in Bermondsey

Warehouse lofts around Shad Thames and Bermondsey Street, large council estates and new blocks around Bermondsey Spa.

01

Shad Thames is lined with converted Victorian warehouses, where pipes run in boxing and risers that need careful opening up.

02

Council estates here usually have shared risers. If water is coming from a communal pipe, report it to Southwark’s repairs line as well as calling us.

03

Parking near Tower Bridge Road and Jamaica Road is tight, so tell us where the van can stop.

Homes we work on in Bermondsey

Warehouse conversionsPost-war estatesNew-build flatsVictorian terraces

Including

Bermondsey Street · Shad Thames · Bermondsey Spa · Maltby Street · Southwark Park Road · Jamaica Road · Tower Bridge Road

Before we get there

What to do right now

Five things that limit the damage in a Bermondsey home, in this order. Most take less than a minute.

  1. 01

    Turn off the stopcock

    Usually under the kitchen sink. Turn it clockwise until it stops. In a flat it may be in the airing cupboard or a communal cupboard outside your door.

  2. 02

    Keep away from wet electrics

    If water is near lights, sockets or the fuse box, switch off at the consumer unit, but only if you can reach it without standing in water.

  3. 03

    Drain the system down

    Turn off the boiler and any immersion heater. Open the cold taps, then flush the toilets, so the water left in the pipes runs away safely.

  4. 04

    Catch it and clear the area

    Buckets and towels under the leak, valuables out of the way. If a ceiling is bulging, keep everyone out from underneath it.

  5. 05

    Call us, or send the details

    Ring and we’ll talk you through it, or tap through the form with a few photos and we’ll call you back.

Inside the cupboard under a kitchen sinkThe rising main comes up through the floor to the stopcock, which has a drain-off valve above it. Above that the cold pipe tees off to the cold tap through an isolation valve, to a washing machine valve, and up to the rest of the house. The hot pipe comes up from the boiler to the hot tap through its own isolation valve.TO HOUSEHOT FROMBOILERTO WASHERFROM THE STREETWASTE123456FIG. 1 · UNDER THE SINK
Stopcock seen from the front: turn the handle clockwise to turn the water offA · STOPCOCKOFFclockwiseOn: anticlockwiseWater in ↑
Isolation valve: slot in line with the pipe is on, slot across the pipe is offB · ISOLATION VALVEONslot along the pipeOFFslot across the pipeA quarter turn with a flat screwdriver
  1. 1

    Stopcock. Shuts off all the cold water coming into your home. Turn it clockwise until it stops (detail A).

  2. 2

    Rising main. The supply pipe from the street. It usually comes up through the floor, right below the stopcock.

  3. 3

    Isolation valves. On the pipes to each tap. A quarter turn with a flat screwdriver shuts off just that tap (detail B).

  4. 4

    Appliance valve. The lever valve for a washing machine or dishwasher. Lever across the pipe means off.

  5. 5

    Drain-off valve. Not always fitted. Used to empty the pipes once the stopcock is off. Leave it closed.

  6. 6

    To the rest of the house. Bathroom, toilets, loft tank and boiler all feed from here, so the stopcock stops them too.

The stopcock only stops cold water coming in. For hot water, also turn off the boiler or immersion heater.

Can't find it or it won't turn? Don't force it with tools. Call us and we'll talk you through the other options.

Find it before you need it

Where’s the stopcock in Bermondsey?

Most flats here have the stopcock under the kitchen sink or in the airing cupboard. On council estates there is often also a valve in the communal corridor or riser cupboard, which the housing office controls.

Victorian and Georgian terraces

Under the kitchen sink, or under the floorboards just inside the front door. In older houses check the cellar or the cupboard under the stairs.

Converted flats

In your kitchen or bathroom if the flat has its own supply. Some conversions share one stopcock, often in the ground-floor flat or the hallway.

Council and estate blocks

Often in the airing cupboard or by the front door. Many blocks also have a valve in the corridor or riser cupboard that the caretaker or housing office controls.

New-build flats

Usually in a utility or boiler cupboard, sometimes behind a panel by the kitchen sink. Your building’s home user guide should show it.

More help: what to do for each kind of plumbing emergency.

Not sure?

Is it an emergency?

If it’s on the red list, call. If it can wait, send the details and we’ll fit you in.

Call now
  • Water you can’t stop, even with the stopcock off
  • Water coming through a ceiling or light fitting
  • A ceiling that is bulging or sagging
  • A toilet or drain overflowing with waste
  • No water at all, and the neighbours have water
  • No heating or hot water with someone vulnerable at home
Get it seen today
  • A leak you’ve stopped by isolating it
  • The only toilet in the house is blocked
  • Boiler losing pressure or showing a fault code
  • A tap or cistern that keeps running
Can usually wait for a booking
  • A slow drip into a bucket that isn’t getting worse
  • A slow-draining sink or bath
  • A dripping outside overflow pipe
  • Low pressure on one tap only

How a callout works

From your call to fixed

No call centre. You talk to the people who do the work.

  1. 1

    You call, or send the details

    Ring any time, day or night. Or tap through the form: what’s happening, your number, your postcode, a few photos.

  2. 2

    We call back and make a plan

    A plumber talks you through making it safe while we’re on the way, and asks what we need to bring.

  3. 3

    We make it safe first

    Water off, the leak stopped, the electrics kept clear. Then we find the cause.

  4. 4

    Then we fix it

    We explain what’s gone wrong and what the repair involves before we start, so there are no surprises.

FAQ

Emergency plumber Bermondsey: your questions

I’m a council tenant in Bermondsey. Can you help?

If the leak is inside your home and you need it stopped now, yes. For communal pipes and anything the council is responsible for, report it to them too so the repair is recorded.

Do you cover SE1 as well as SE16?

Yes, the Bermondsey side of SE1, including Bermondsey Street and Shad Thames.

Can you fix a leaking boiler?

Yes. Boiler work is carried out by a Gas Safe registered engineer (567789). In the meantime, turn the boiler off at its switch, put a container under the leak and tell us the make and any fault code.

I can smell gas. Should I call you?

No. Call the National Gas Emergency Service free on 0800 111 999, any time. Turn the gas off at the meter if you can, open windows and don’t use switches or flames. Once they’ve made it safe, we can repair the appliance: our engineers are Gas Safe registered (567789).

Emergency in Bermondsey?

Call now, day or night. Or send the details and photos and we’ll call you back.

Call nowSend details